Good heat.
Great outdoors.

The 5 × 6 ft interior starts at $9,995, the 6 × 8 at $14,995, and the 6 × 10 at $19,995. Standard 2×4 construction, R15 wall insulation and a 9kW VEVOR heater are included. Premium 2×6 construction with R23 insulation adds 15% of the base sauna price. Use the builder to see your size and upgrades together. Delivery is $5 per one-way road mile from Vestal, NY within 1,000 miles, and is added when you enter your mileage. Tax, site preparation and electrical hookup are separate. Final pricing and availability are confirmed in writing.

A 12kW heater upgrade is recommended for the 6 × 10 model, subject to final sizing. Room volume, ceiling height, insulation and glass all affect the heater required. Choose “Help me size my heater” in the builder for a separately priced recommendation. The listed 8kW options are available only where approved sizing permits.

Two 18 × 20 inch insulated tempered double-pane windows are included, along with a solid cedar-faced door. Custom insulated tempered double-pane glass is charged at twice the supplier material price. The 60 × 60 inch example is a $2,300 allowance, pending a final supplier quote and layout review.

Yes. A 4 × 6 ft room extends from the end of the sauna. You enter this room first, then pass through an interior door into the sauna. It includes pine tongue-and-groove lining and one or two benches, depending on the layout. The 4 × 6 room is $6,399 with any sauna size. Cedar lining adds $1,000.

A rubberized water-resistant floor is standard. Removable cedar duckboard starts at $599 for the 5 × 6 sauna and scales with the sauna floor area. Electric heated flooring is $40 per sq ft installed, for the sauna only or the sauna and changing room. Choose an under-bench trench drain for $649. It discharges directly onto the ground beneath the sauna.

The PROSAUNAS fully tempered glass door is a $1,500 upgrade. It measures 24 × 73 inches and includes a roller latch and black alder frame. Choose a left- or right-side hinge as viewed from outside the sauna room. Door placement and fit are confirmed with your layout.

Delivery is $5 per one-way road mile from Vestal, NY, up to 1,000 miles away. For example, 200 miles is $1,000. Use the delivery calculator and enter your driving distance to see an estimate. Final route mileage and safe access are confirmed with your quote. Delivery includes unloading at a drop-off point accessible to a 7×14-foot trailer. Further placement and site preparation cost extra.

Delivery includes bringing your sauna to your driveway or another area where a 7×14-foot trailer can be safely backed in, and removing the sauna from the trailer at that drop-off point. It does not include moving the sauna elsewhere on your property. Need help creating a level spot or moving your sauna to a harder-to-access area? Ask us before scheduling delivery. Additional setup or placement services may be available for a separate fee, depending on your site and our availability.

Your sauna needs a level area. Standard delivery includes unloading at a spot safely accessible by backing in a 7×14-foot trailer; moving the sauna beyond that point is not included. Ask about site preparation and additional placement services before delivery. For electric heat, have a qualified electrician confirm the chosen heater’s supply, circuit and panel capacity requirements. Site preparation and electrical hookup are separate costs.

The supply connection from your home or grid to the sauna is not included. Have a qualified electrician verify your panel capacity and install the circuit specified for the selected heater and controls. Requirements vary by heater size and model, and are confirmed before installation.

Electric heat makes starting a session simple: walk in and turn it on. A 9kW VEVOR heater is included, with a Harvia KIP and Wi-Fi controls upgrade available. Warm-up time depends on the heater, room size, glass, weather and preferred temperature. Plan for the separate cost of an electrician completing the supply connection.

Yes. Once your sauna is placed and set up, the wood-fired heater is ready to use the same day, with no electrical wiring required for heat. Before installation, we carry out the stove’s initial burn outdoors to cure its exterior paint and burn off manufacturing residues. Doing this outside helps keep initial burn-off odors and fumes out of your sauna. Lighting needs a separate power source.

Yes, with a wood-fired heater. No connection to your home is needed for heat. The lighting can be powered by solar or a suitable extension-cord connection. Our $1,449 solar lighting option includes everything needed to power the lighting off-grid, without running wires to your house. It does not power an electric sauna heater.

Yes. The Harvia KIP 8kW upgrade includes compatible Wi-Fi controls for a combined $2,600. We confirm the external-control heater model, matching controls, required remote-start safety accessories and heater sizing with your quote.

Yes. Your sauna arrives fully assembled, with no prefab kit to put together. Prepare a level area before delivery. Wood-fired heat is ready to use once the sauna is placed and set up; the electric option requires your electrician to complete the 240V supply connection.

Yes. The sauna is designed for year-round use, with insulated walls and ceiling and a foil sauna vapor barrier. Standard 2×4 construction has R15 wall insulation; the optional 2×6 upgrade has R23 wall insulation.

Grey is the standard exterior color. We can paint the exterior a custom color for an additional charge. Tell us what you have in mind and we’ll include the price in your quote. Exterior customization is currently limited to paint color.

Saunas typically take 4 to 6 weeks from your initial order. Ask about our current inventory, too. We sometimes have completed saunas ready to go, which may be available sooner. We’ll confirm availability and timing when you inquire so you can plan site preparation and any electrical work.